RAIDER Sport
Outhaul Rigging Procedure
|
|
|
Step 1: Tie end of outhaul line (WHITE in this photo) to the eye in the
block using a bowline knot. Leave line as long as possible to get maximum
travel during outhaul adjustment.
|
|
|
Step 2: This is the proper rigging of the cunningham/downhaul (purple)
and outhaul (WHITE).
|
|
|
Step 3: At the opposite end of the boom the outhaul line exits from the
turning block towards the sail around the hook ( in this photo the line goes
through the optional pulley) and back to the grommet in the boom with a
figure eight knot securing it in place. |
